Part Finder
Promote Your Inventory
TESTING SERVICES MROs
AM-Tech Engineering Inc
CAA, DGCA, FAA, INAC
City of Panama, Panama, Panama
AM-TECH ENGINEERING, Inc., is based in Panama with commercial offices in Miami, USA, and Barcelona, Spain. Offers aircraft line maintenance services, programmed and corrective maintenance, airport...
Doral, FL, USA
Servicing the compressor systems of 10,000+ satisfied Air Compressor Works customers from Fort Pierce to the Florida Keys. Air Compressor Works strives to give our clients exceptional service across...
Manhattan, CA, USA
Appinventiv is an award-winning organization providing impeccable technology solutions to startups and Fortune 500 companies. Today stands strong at 1000+ tech experts, engineers, and professionals...
Bridgewater, MA, USA
ABC Testing Incorporated is certified as ASNT SNT TC 1A, level III in Ultrasonic, Radiography, Magnetic Particle, Liquid Penetrant and visuals. We also offer Charpy Impact Testing new England, Bend...
Santa Monica, CA, USA
We provide Aircraft Propeller & Governor Repair and Overhaul Services. With the Aircraft Propeller industry growing in every direction, there are many types of aircraft propellers out on the market...
Bridgewater, MA, USA
ABC Testing Incorporated Company is certified in Mechanical / Destructive Testing. It is locate in Bridge water, Massachusetts, United States. It provides several types of destructive tests to aid in...
Cedar Knolls, NJ, USA
Spectro | Jet-Care provides quality analysis on a range of oil wetted aircraft components. Analysis of oil, hydraulic fluid, debris particles, filters and fuel samples is available 7 days a week, 24...
Aero Standard Calibration
FAA, ISO 9001Lewisville, TX, USA
We have over 30 years of experience in avionics test equipment calibration and repair services; plus, our technicians have the training and ability to repair down to component board level. Our goal...
Odiham, Hampshire, United Kingdom
Spectro | Jet-Care provides quality analysis on a range of oil wetted aircraft components. Analysis of oil, hydraulic fluid, debris particles, filters and fuel samples is available 7 days a week, 24...
RUH Aviation MRO
EASA, FAA, ISO 9001Kyiv, Kyiv, Ukraine
RUH Aviation MRO is proper provider to maintain the aircraft in airworthiness. Our experienced engineering team will perform high quality works with the possible shortest TaT. Our innovative...
Hialeah Gardens, FL, USA
Trident NDT Services, LLC is a Non Destructive Testing Specialist company located in South Florida. Trident NDT Services also performs AOG NDT services within the entire State of Florida. We also...
Longueuil, QC, Canada
CEL is a world leader in test equipment for aircraft engines; turboprops, helicopters, business and airline jets, as well as APUs (Auxilliary Power Units) and industrial applications. With facilities...
Froude
ISO 9001Novi, MI, USA
For over 140 years, Froude has been widely recognized as the world’s leader for the automotive, gas turbine, aerospace, marine, and industrial markets for the engine and turbine testing systems...
DJC AVIATION NDT SERVICES
AS9110, ISO 9001...Jubail, Eastern province, Saudi Arabia
"DJC AVIATION" granted GACA certification for Part-145 repair station # AMO-031 as approved repair station for "Limited Nondestructive Inspection, Testing, and Processing". With ops spec...
Rocky Hill, CT, USA
HBL is a leading industrial and specialty battery manufacturer. We design, test, and manufacture the world’s widest ranges of batteries for applications including aircraft engine starting...
Chelmsford, MA, USA
Since 2010, OSAAP has been providing custom shadow boards for industries such as aerospace, field service technicians, and any industry that requires that all tools and/or parts are accounted for...
Concorde Battery
AS9100, FAA, ISO...West Covina, CA, USA
Concorde® Battery Corporation is a manufacturer of premium quality lead-acid batteries. Present product lines include valve regulated sealed lead-acid batteries (VRSLA) for aircraft, applications...
Rockeville, MD, USA
OKOndt GROUP™ represents a group of companies with more than 25 years of experience in the research, development, and manufacture of NDT products. Our industrial clients around the world are...
Lakeland, FL, USA
We are an Aircraft Weighing Service. Load Cells, Platforms, Under axle with Jacks. Cessna 150 through 737 - MD80 - A320
Space Science Services Inc
FAA, NADCAPDothan, AL, USA
Space Science Services is a nondestructive, metallurgical testing and inspection company with over 50 years of industrial experience and excellent customer service.
Senior Operations LLC
AS9100, EASA, FAA...Sharon, MA, USA
Performance-driven organizations turn to the Senior Metal Bellows team of engineers, designers and fabricators—as passionate and committed colleagues—in order to push the boundaries of their...
Prestige Aero Services Inc
EASA, FAAMiami, FL, USA
Prestige Aero Services, Inc. is a full service FAA and EASA Certified Repair Station with specialized service ratings for: Overhaul, Repair, Modification, NDT, Flame Spray, Welding, Bench Testing &...
NDT Laboratory
FAA, NADCAPSunnyvale, CA, USA
NDT Laboratories, LLC provides the full range of non-destructive testing services – Radiography, Penetrants, Mag Particle, Ultrasonic – to high-reliability manufacturers who can’t afford to...
AOG Inspection Limited
EASA, FAAWitney, Witney, United Kingdom
Based in Witney, Oxfordshire, AOG Inspection Ltd provide specialised Non-Destructive Testing services for Aviation. Our inspectors have extensive experience in aviation NDT and consultancy, working...
XRI Testing
AS9100, FAA, NADCAPGreer, SC, USA
For over 70 years X-R-I Testing, a division of X-ray Industries, has been committed to performing high quality NDT inspection services on our customer’s products for integrity, safety, and...
Vandergriff Technologies Inc
FAA, NADCAPHaltom City, TX, USA
Vandergriff Technologies is truly a unique in-house Non-Destructive Testing (NDT) lab. We offer a full range of NDT methods: Ultrasonic, Computed Radiography, Radiography, Dye Penetrant, and Magnetic...
Wichita, KS, USA
Air Capital NDI is an FAA approved repair station that provides testing for some of the fastest turnaround times in the business for a variety of industries including aerospace and defense.
St. Petersburg, FL, USA
Sunstate Propeller is based in St. Petersburg, Florida and we are the leader in propeller based maintenance services. Our state-of-the-art facilities offer industry key developments that allow more...
West Valley Plating Inc
FAA, NADCAPChatsworth, CA, USA
Welcome to West Valley Plating, specialists in quality metal plating, non-destructive metal testing and finishing. Located in Chatsworth, California, we provide general services in metal plating with...
Nanjing Wanghang Aircraft Component Maintenance EN
CAAC, EASA, FAANanjing, JIANGSU, Jiangsu, China
Nanjing Wanghang Aircraft Component Maintenance Engineering Co., Ltd (hereinafter referred to as "WHMEC") is devided from the former AVIC No.609 Reasearch Institute (Aviation Industry Corporation of...
Sonico Inc
EASA, FAAMoses Lake, WA, USA
Services include flight line maintenance and aircraft storage. Aircraft maintenance and storage is supported by back-shops for component repair, non-destructive testing, machining and parts...
Silean LLC
FAATremonton, UT, USA
Federal Aviation Administration (FAA) and European Aviation Safety Administration (EASA) Certified Repair Station start-up providing On-Wing Nondestructive Testing Services to commercial aviation...
Structural Testing Systems
FAA, NAS-410Ronkonkoma, NY, USA
Structural Testing Systems is an FAA Part 145 Repair Station (ES1R124K), a premier Mobile Non-Destructive testing (NDT) company located on central Long Island New York specialized in and dedicated to...
MT-Propeller USA Inc
EASA, FAADeland, FL, USA
MT Propeller USA Inc. is an authorized MT-Propeller Sales and Service Center established to provide the Highest Quality Repair and Overhaul of the MT-Propellers and associated products. Services...
Curtis Wright IMR Test Labs
FAA, NADCAPSuzhou, Suzhou, China
We’re an international firm offering a complete scope of materials testing services, including chemical analysis, cleanliness testing, corrosion testing, mechanical testing, metallurgical analysis...
Aviation Inspection and Services
EASA, FAAWest Melbourne, FL, USA
Aviation Inspection & Services, Inc. is a dynamic organization designed to service your repair and overhaul needs. We listen closely to our customers and tailor effective individual programs for...
Stevensville, MT, USA
Located in the spectacular Bitterroot Valley in Western Montana, Tamarack Helicopters offers full service repair and overhaul of UH-1 components and complete helicopter restoration at our FAA repair...
Applied Technical Services Inc
EASA, FAA, ISO 9001...Chesapeake, VA, USA
Applied Technical Services, Inc. (ATS) is a premier provider of high quality consulting engineering, testing, and inspection services. Since our founding in 1967, ATS has established an excellent...
Tailwind Inspection Inc
EASA, FAA, NAS-410Tulsa, OK, USA
Tailwind Inspection is a provider of non-destructive testing services to the aircraft and aerospace industries. With nearly 100 years of combined experience, we have one of the highest quality...
TGI Industrial Services
FAA, NAS-410Tulsa, OK, USA
TGR Industrial Services is a national provider of non-destructive testing and heat treating services. TGR's business is assuring the integrity and optimization of critical components and process...
Buffalo Gap, TX, USA
Aerospace precision Aircraft welding and fabrication is a demanding business. It requires specialized welding training and experience working with exotic metals and exacting techniques. At Spitfire...
Valence Surface Technologies
AS9100, FAA, NADCAPParamount, CA, USA
Valence Surface Technologies is a full-service surface finishing company specializing in the commercial aerospace, defense, space and satellite industries. Our services include: Chemical Processing...
Pearland, TX, USA
Texas Aircraft Propeller and Accessories is approved to overhaul propellers by Sensenich, Hartzell, and McCauley. We offer you all work in-house from Shot Peening of Harzell Blade Knobs to machining...
Rotable Repairs Limited
EASA, FAA, TCCAEssex, Essex, United Kingdom
We are a UK based EASA Parts 145, FAA Part 145 and TCCA Transport Canada approved repair station. Our facility offers full in-house testing, inspection, repair and overhaul of most light regional...
Tailwind Inspection Inc
EASA, FAA, NAS-410Dallas, TX, USA
Tailwind Inspection is a provider of non-destructive testing services to the aircraft and aerospace industries. With nearly 100 years of combined experience, we have one of the highest quality...
S E A L Aviation LLC
DGAC, EASA, FAAFt. Lauderdale, FL, USA
SEAL Aviation performs Aircraft Fuel Leak Repair, Non-Destructive Testing and Airframe Structural Repairs anywhere in the world. We believe no job is too small or too ambitious. Once you have called...
Apex Inspections Inc
EASA, FAAFarmers Branch, TX, USA
Apex Inspections' mission is to provide our customers access to technically sound, professionally performed NDT services and will continue to approach our jobs with passion and an unmoving commitment...
East Granby, CT, USA
Overhaul Support Services provides specialized front-end services to prepare dynamic helicopter components for overhaul or repair. Because this is our only business, we have qualified teams assigned...
Paragon NDT LLC
FAA, NADCAPWichita, KS, USA
With the joining of the professional non-destructive testing and inspection personnel from both Paragon Services, Inc. and ERI Solutions, Inc., Paragon NDT, LLC carries a comprehensive list of...
XRI Testing Inc
FAA, NADCAPZeeland, MI, USA
Since 1941, we’ve held a leadership position in the nondestructive testing industry by focusing on technical expertise and customer service. With more than seven decades of experience to draw on...
Quality Testing Services Inc
FAA, NADCAPSt. Louis, MO, USA
Quality Testing Services, Inc. has been providing critical nondestructive testing, inspection, safety and asset integrity services to clients throughout a broad scope of industries. Wherever the need...
Southern Air Repair Corporation
EASA, FAAGreenville, SC, USA
Here at Southern Air Repair, our team brings Innovative Engineering and Aviation Machining to a whole other level, including our Welding and CNC experience to accomplish our component piece part...
Fort Worth, TX, USA
Aviation Inspections has been providing professional quality NDT services since 1991. With in-house and portable field service capabilities combined with over 70 years experience, We are able to...
Twigg Corp
AS9100, FAA, ISO...Martinsville, IN, USA
For more than 40 years Twigg Corporation has been a leader in the field of precision fabrications, supplying both military and commercial aerospace firms. State of the art machining, brazing and...
P T I Industries Inc
EASA, FAA, NADCAPEnfield, CT, USA
PTI was founded in 1983 to provide non-destructive testing services to machine shops serving the aerospace and medical industries. Over the years the number of services we provide has grown by adding...
Daytona Beach, FL, USA
Our residential campuses located in Daytona Beach, Florida and Prescott, Arizona offer you the choice of a spectacular beach setting or an amazing mountain community. Embry-Riddle Worldwide & Online...
Tygor Laboratories Inc
DCA, EASA, FAA...Milford, CT, USA
TYGOR Labs is more than just a metallurgical, non-destructive testing laboratory. We are the company adding safety, reliability, integrity and confidence to your products. We have specialized in the...
ND Technologies LTD
EASA, FAA, GCAAShannon, Ireland, Ireland
N.D. Technologies provides non-destructive testing support for the aviation and wind farm industries from its base in Shannon, Co. Clare, Ireland and worldwide. We now work with many of the world’s...
San Antonuo, TX, USA
NONDESTRUCTIVE TESTING FOR VARIOUS INDUSTRIES Ensure the safety of your commercial or industrial facility with testing services from Ruiz Testing Services, Inc. We are a small, woman-owned company in...
Aviation Technical Testing Inc
FAA, NAS-410West St. Paul, MN, USA
Nondestructive testing services, training, and consultation for the aviation community. Your source of comprehensive aircraft NDT services, AvTech is dedicated to delivering quality nondestructive...
Miami, FL, USA
Since our company’s inception in 1955, we have provided our customers the highest level of quality and service found in the industry. We perform a wide variety of aviation services in our 35,000...
Barnesville, GA, USA
We provide NDT and Keyway Slot & Key Boss Repair, Manufacturer's Service Bulletins & Modifications, Bushing Repairs; Bolt Hole, Axle Bore & Piston Bore, Quality Blend Repairs & Professional Corrosion...
Stockton, CA, USA
Big Valley Aviation, Inc. was started in 1975 to address the offtimes specialized and unique maintenance and overhaul needs of regional helicopters and fixed wing aircraft. We are a Customer Service...
East Hartford, CT, USA
Founded in 1953 and serving the Aerospace and Nuclear Manufacturing communities for over 60 years, Parker X-Ray is a worldwide leader in NDT inspection. NDT Methods Radiography Inspection (X-Ray)...
Medley, FL, USA
OAI is a State of the Art Machine Shop for component repair to support its customer’s need with multiple Lathes, Milling, Honing, Surface grinders and an Electrical Discharging Machines to achieve...
Hollywood, FL, USA
QC Laboratories, Inc. is a privately owned industrial/commercial non-destructive testing laboratory (NDT), incorporated in the State of Florida in 1965 with branches in Hollywood and Orlando, Florida...
XRI Testing
FAA, NADCAP# 1 Troy, MI, USA
X-R-I Testing provides a variety of non-destructive testing (NDT) services across the United States with testing locations in Michigan, Ohio, Illinois, South Carolina, North Caroling and Virginia...
Houston, TX, USA
SyngineeringNDT, a Veteran Owned Small Business, provides high quality specialized NDT (Non-Destructive Testing) services on a global scale. We have customers in Aviation, Aerospace industries...
Wichita, KS, USA
Metal Finishing Company is the largest privately owned Aerospace Processing company in North America. A true One Stop Shop for Aerospace incorporating Heat Treatment, Non-Destructive Testing...
Thomas Instrument Inc
AS9100, FAA, ISO...Brookshire, TX, USA
Thomas Instrument is a provider of product and systems engineering, manufacturing, assembly, testing, and repair/overhaul services to the United States Department of Defense. As a multi-faceted and...
Testia France
EASA, FAA, ISO 9001...Toulouse, France, France
Testia is an AIRBUS company with over 25 years of experience in the field of Non-Destructive Testing, Quality Inspections and Training in Aerospace. ESTIA offers a unique range of NDT and Quality...
Ultimate NDT Inc
AS9100, FAA, ISO...Homestead, FL, USA
Ultimate NDT Services is a trusted company who can perform your required non-destructive testing (NDT) services. Ultimate NDT Services is a division of Your Manufacturing Support Inc and was...
Charlotte, NC, USA
NLA Diagnostics has taken the lead in composite materials testing through a unique, non-destructive means of detecting and locating defects and damage at their earliest stages—before they become...
Bethany, OK, USA
Southwind Aviation is an FAA & EASA Part 145 (#UO9R076Y) certified repair station. Our expansive services include maintenance, repair and overhaul of electrical components, wheel & brake overhaul...
Broken Arrow, OK, USA
Veracity Technology Solutions was established in 2006 to provide custom nondestructive inspection solutions for military, aerospace and power generation customers. Utilizing proprietary technology...
Buckinghamshire, Buckinghamshire, United Kingdom
Today 90% of Pandect business is in slip ring design and manufacture in the UK for mainly aerospace, radar and defence programmes and some other high specification, volume industrial applications...
Greenville, SC, USA
Applied Technical Services, Inc. (ATS) is a premier provider of high quality consulting engineering, testing, and inspection services. Since our founding in 1967, ATS has established an excellent...
NDT-Solutions Inc
EASA, FAAHollywood, FL, USA
NDT Solutions, Inc. is a fully certified non-destructive inspection (NDI) facility with over 30 years of combined experience. We specialize in providing NDI services to a variety of aerospace, marine...
Cincinnati, OH, USA
QC Laboratories, Inc. is a privately owned industrial commercial testing laboratory Incorporated in the State of Florida in 1965 with branches in Orlando and Cincinnati, Ohio. Our expertise is...
Apple Valley, MN, USA
NDIC has on staff ASNT level 3 & CWI personnel to provide NDT program support, training, or procedure writing. Whether you need your inspectors trained, parts & materials inspected, aircraft...
Singapore, Singapore, Singapore
Setsco is a leading organization offering a comprehensive range of testing, calibration, inspection, certification, consultancy and training services to key markets such as Oil & Gas, Aerospace...
Hooper, NE, USA
Nebraska Gas Turbine Inc (NGTI) supports a wide variety of General Electric, Honeywell and Rolls-Royce helicopter engines and engine components. Our legacy of support for these leading manufacturers...
B and G Instruments Inc
EASA, FAAMiami Springs, FL, USA
Since 1982 B & G Instruments, Inc. has been committed to the highest standard of aircraft and flight simulator instrument and accessory service. We are conveniently located in the Pan Am...
XRI Testing
FAANiles, IL, USA
At X-R-I Testing, we recognize that your success is directly linked to your product’s integrity, safety, and reliability. Our mission is to reduce the potential danger to human life by assuring the...
4D Technology Corporation
FAA, EASA, CAACTucson, AZ, USA
4D Technology designs and manufactures surface gauges, surface roughness profilers and other metrology for accurate measurement of precision surfaces. The 4D InSpec Surface Gauge is the first...
Miamisburg, OH, USA
ABOUT US Established in 2002 in Dayton, Ohio, American Testing Services has grown from a small inspection house with 3 employees to a respected industry leader. Originally focused on basic...
Miami, FL, USA
Illuminair Support Corporation is a US FAA Part 145 Repair Station and EASA Approved Maintenance Organization, the company also holds maintenance approvals issued by multiple International Aviation...
Cfan
FAASan Marcos, TX, USA
Paints & Coatings, Testing Services, Machining & Tooling, Engine Overhaul, Engine Accessories, Test Equipment, Composite Repair, NDT, Component Repair, Spare Parts
Las Vegas, NV, USA
**Presenting new solutions for tank diving services, rapid windshield replacement, automated Pressure Test systems and customizable solutions for sealant and paint curing.** For over 20 years...
Aircraft Ducting Repair
FAA, EASAForney, TX, USA
Aircraft Ducting Repair Inc. is an FAA A7DR372J / EASA 145.4097 approved Repair Station specializing in the repair/overhaul of metallic and composite ducts, tubes, manifolds, cowling, plenums, APU...
Oxford, AL, USA
Component Repair, Hydraulics, Testing Services, Fabrication
Georgetown, TX, USA
Component Sales, Avionics, Component Repair, Aircraft Component Parts, Testing Services, Control Panels, Airframe
Salinas, CA, USA
NDT, Component Sales, Propeller MRO, Battery, Aircraft Component Parts, Component Repair, Calibration & Weighing, Engine Accessories, Wheel & Brake
James A. Staley Co.
FAA, EASA, TCCACarmel Hamlet, NY, USA
The James A. Staley Company is a leading designer and manufacturer of specialized aircraft ground support test equipment. The company product areas include fuel, hydraulic, electrical and pneumatic...
Alvin, TX, USA
Electro-Mechanical Components, Structural Maintenance, Pneumatic Components, Testing Services, Machining & Tooling, Welding, NDT, Avionics, Sheet Metal, Engine Overhaul, Hydraulics
Taylor, TX, USA
Aircraft Component Parts, Testing Services, Control Panels, Component Sales, Avionics, Component Repair
Camarillo, CA, USA
CKT is the leader in EWIS testing systems with 500+ cable/harness test systems worldwide - Boeing, Airbus, BAE, Lockheed Martin, Northrop Grumman and Rolls Royce to name a few. CKT’s expertise...
Houston, TX, USA
Engine Overhaul, Engine Accessories, Testing Services, Propeller MRO, Aircraft Component Parts
Santa Clara, CA, USA
California Radomes™ has been in operation since 1980 and has developed a reputation as a leader of Radome repair and overhaul within the Aircraft Industry. We have the finest selection of Aircraft...
Bristow, OK, USA
Aircraft Component Parts, Spare Parts, Testing Services, Part Sales, Component Sales, Component Repair, Engine Overhaul, Engine Accessories, Pneumatic Components, Engine AOG
Uniwest
FAA, EASAPasco, WA, USA
UniWest is a leader in Eddy Current and Ultrasonic Testing applications, engineering, and product development. Join us as we demonstrate the new, state-of-the-art, EVi eddy current imaging product...
Toulouse, France
Testia is an AIRBUS company with over 25 years of experience in Aerospace Non-Destructive Testing, Quality Inspections and Training. Thanks to its global presence, with facilities in Europe, Asia and...
Austell, GA, USA
Peening Technologies provides Shot Peening, Glass Bead Peening, Rotor/Flapper Peening, Nondestructive testing, Vibratory Finishing and many other services to the aerospace, and power generation...
Fort Worth, TX, USA
Electro-Mechanical Components, Avionics, Spare Parts, 3D Printing, Machining & Tooling, Training & Education, Component Repair, AOG, Testing Services, Fabrication, MRO Software, Component Sales...
Long Beach, CA, USA
Aviation Consulting, Property Management and Development
Chandler, AZ, USA
Testing Services, Control Panels, Avionics, Component Sales, Component Repair, 3D Printing
Mascoutah, IL, USA
Testing Services, Fabrication, Composite Repair, Sheet Metal
Chicopee, MA, USA
Part Sales, Paints & Coatings, NDT, Surface Treatments, Machining & Tooling, Component Sales, Component Repair, Aircraft Component Parts, Spare Parts, Fuels & Lubricants
Peachtree City, GA, USA
Aircraft Component Recovery’s state-of-the-art repair facility adheres to the industry’s highest standards of quality.
Anchorage, AK, USA
Flight Controls, Landing Gear, Seating, Calibration & Weighing, Nacelles, Engine Accessories, Welding, Machining & Tooling, Part Sales, Harnesses, Cargo Conversions, Fabrication
Bohemia, NY, USA
Aircraft Component Parts, Component Repair, Seating, Test Equipment, 3D Printing, Cargo Conversions, NDT, Testing Services, Machining & Tooling, Part Sales, Component Sales, Spare Parts
Carrollton, TX, USA
NDT, Testing Services, Training & Education
Miami, FL, USA
Aerothrust is an independently owned CFM56-3/5/7 and P&W JT8D-Std/200 FAA certified engine shop conveniently located in the Miami International Airport. The company has different foreign repair...
Holbrook, NY, USA
Wet Technologies, Inc., a New York engineering and manufacturing company, has supplied high quality, closed-loop, dust/chemical free manual/automated and robotic wet blast systems to the aviation MRO...
Auburn Hills, MI, USA
Marposs has many years experience in the design and manufacture of tooling, fixtures, machine monitoring systems and automatic inspection machines that perform checks on specific parts, used on...
La Verne, CA, USA
Spare Parts, Hydraulics, 3D Printing, Fabrication, Component Sales, Component Repair, NDT, Aircraft Component Parts, Testing Services, Machining & Tooling, Part Sales
St-Laurent, QC, Canada
Lockheed Martin’s legacy in aviation is carried on within the engine Maintenance, Repair, and Overhaul (MRO) industry by Lockheed Martin Commercial Engine Solutions (LMCES). Our world-class...
M.A.R.S. Inc.
FAA, EASAMiami, FL, USA
Magnum Aircraft Repair Services is an FAA & EASA approved repair station specializing in the test, repair and overhaul of a wide variety of Accessory Components (mechanical, electrical & electronic)...
Cape Coral, FL, USA
Chemicals & Cleaning, NDT, Component Repair, Engine Accessories, Engine Overhaul, Welding, Testing Services
Fort Myers, FL, USA
NIC provides a full suite of inspection methods and technologies to cover most inspection requirements encountered in the aerospace and aviation industries. Our NAS-410 certified technicians are...
Oceanside, CA, USA
Avionics, Component Repair, In-flight Entertainment, Testing Services, Part Sales, Component Sales
Moreno Valley, CA, USA
Testing Services, NDT, Electro-Mechanical Components, Component Repair, Engine Accessories
Oscoda, MI, USA
Phoenix Composite Solutions, LLC (FAA repair station X4PR743X, EASA 145.5623, CAAC F00100598, CAAV VN-047NN, ITAR) provides the following repair services: airframe and engine composite, metal and...
Schiphol-East, Netherlands
Airframe, Line Maintenance, Interiors, Asset Management, APU, Chemicals & Cleaning, Avionics, Engine Overhaul, Testing Services, FBO, Paints & Coatings
Tulare, CA, USA
Component Repair, Engine Accessories, Fabrication, Component Sales, Calibration & Weighing, Structural Maintenance, Sheet Metal, Engine Overhaul, Part Sales, Propeller MRO, Line Maintenance, Aircraft...
Washington, PA, USA
Propeller MRO, Spare Parts, Testing Services, Wheel & Brake, Control Panels, Heavy Checks, AOG, Sheet Metal, Chemicals & Cleaning, Airframe, Avionics, Calibration & Weighing, Engine Overhaul, Windows...
Stockton, CA, USA
Aero Turbine, Inc. is the leading and most comprehensive provider of maintenance, repair, and overhaul (MRO) services and consultative repair solutions for military engines and accessories on mature...
Addison, IL, USA
Surface Treatments, Testing Services, Paints & Coatings
Miami, FL, USA
Aerotools Connection provides quality commercial aircraft maintenance tooling and GSE worldwide. We stock a large inventory of tools, electrical equipment, components and test equipment for all types...
Greenwood, AR, USA
3D Printing, Testing Services, Machining & Tooling, NDT, Tools & Accessories, Surface Treatments, Welding
Fullerton, CA, USA
Machining & Tooling, MRO Software, Component Sales, Component Repair, Tools & Accessories, Testing Services
IAC LTD
FAAFort Worth, TX, USA
Propeller MRO, NDT, Component Repair, Structural Maintenance, AOG, Surface Treatments
Fairhope, AL, USA
Spare Parts, Engine Accessories, Component Repair, Part Sales, Component Sales, Engine Overhaul, Avionics, Interiors, Aircraft Component Parts, Testing Services
Wichita, KS, USA
Products for the Aerospace and Gas Turbine Industries.
Cemb USA
FAAGainesville, GA, USA
CEMB is a Worldwide, Leading manufacturer, of universal horizontal, vertical and special balancing machines for the Aerospace, Automotive and General Manufacturing Industries, since 1946. We Supply...
Hampton, GA, USA
Engine Overhaul, Engine Accessories, Testing Services, Component Repair
Leesburg, VA, USA
Interiors, NDT, Line Maintenance, Heavy Checks, Avionics, Engine Overhaul
San Francisco, CA, USA
Testing Services, Avionics, Component Repair, Calibration & Weighing, Test Equipment
Hertfordshire, UK
Aircraft Component Parts, Spare Parts, Test Equipment, Testing Services, Part Sales, Advanced Materials, Avionics, Component Sales
Chromalloy
FAA, EASAPalm Beach Gardens, FL, USA
Chromalloy has evolved from a gas turbine engine parts repair business into a leading independent supplier of advanced repairs, protective barrier coatings and FAA-approved reengineered parts for...
Philadelphia, PA, USA
Component Sales, Structural Maintenance, Environmental Services, Avionics, In-flight Entertainment, Aircraft Component Parts, Interiors, Testing Services, Part Sales
Montreal, QC, Canada
Avionics, AOG, Interiors, Painting, NDT, In-flight Entertainment
Alpha Turbine Aviation Technology LLC
FAA, EASA, INACMiami, FL, USA
Testing Services, Line Maintenance, NDT, Heavy Checks, Component Repair, Engine Overhaul, Engine Accessories, Tear Down
Jamestown, NY, USA
Blackstone-NEY Ultrasonics, located in Jamestown, NY, is a recognized leader in ultrasonic technology. Starting with the introduction of sweeping frequency in 1988, there has been a continuous stream...
North Las Vegas, NV, USA
Asset Management, Control Panels, Component Sales, Avionics, Spare Parts, Part Sales, Heavy Checks, Aircraft Component Parts, Calibration & Weighing, Line Maintenance, Propeller MRO, Airframe...
Sola, Norway
AERO NORWAY delivers CFM56 Series Engine Services focused on total precision to deliver exceptional industry recognised EGT margins. Combining a fresh Norwegian spirit with a long and proud...
Naples, Italy
Part Sales, Paints & Coatings, Electro-Mechanical Components, Engine Overhaul, Engine Accessories, Surface Treatments, Machining & Tooling, Component Sales, Component Repair, Aircraft Component Parts...
Westfield, MA, USA
Calibration & Weighing, Tools & Accessories, Surface Treatments, Welding, Machining & Tooling, Paints & Coatings, NDT
Essex, UK
Motion Controls, Electro-Mechanical Components, Component Repair, Spare Parts, Pneumatic Components, Machining & Tooling, Fans, Fabrication, NDT, Test Equipment, Fuselage, Propeller MRO, Lighting...
Miami Lakes, FL, USA
Hydraulics, Coffee Makers, Wheel & Brake, Landing Gear, Component Repair, Calibration & Weighing
Newnan, GA, USA
Training & Education, Avionics, Engine Accessories, Engine Overhaul, Test Equipment, Testing Services, Part Sales, Propeller MRO
Essex, UK
Landing Gear, Component Repair, Surface Treatments, Machining & Tooling, Wings, Wheel & Brake, Airframe, NDT, Engine Accessories, Welding, Windows, Testing Services, Nacelles
Middlesex, UK
Avionics, APU, Sheet Metal, Leasing, Consulting, Electro-Mechanical Components, Aircraft Component Parts, Component Sales, Engine Overhaul, Engine Accessories, Part Sales, Propeller MRO, Battery, NDT
San Jose, CA, USA
NDT, Component Sales, Component Repair, Aircraft Component Parts, Spare Parts, Engine Overhaul, Part Sales, Line Maintenance
Chatellerault, France
TMH AMS and TMH TOOLS – two companies of TECHMAN HEAD group - are major worldwide OEM of Test Rigs, GSE and Tooling to support all customers in aircraft maintenance works. TMH-AMS : OEM of mobile...
Mena, AR, USA
Welding, Testing Services, Machining & Tooling, Flight Controls, Heavy Checks, Component Repair, Structural Maintenance, Fuselage
Doral, FL, USA
Machining & Tooling, Avionics, Hydraulics, Testing Services, Pneumatic Components
Tucson, AZ, USA
Line Maintenance, NDT, Surface Treatments, Heavy Checks
Lafayette, GA, USA
Wheel & Brake, Chemicals & Cleaning, Engine Overhaul, Connectors & Fasteners, Battery, Airframe, Line Maintenance, Landing Gear, Avionics, Heavy Checks, Testing Services
Waco, TX, USA
For more than sixty years MarathonNorco Aerospace has successfully served commercial and military aviation markets with reliable cost effective power and mechanical products. Our power products...
City Of Industry, CA, USA
Part Sales, Interiors, 3D Printing, Battery, Component Sales, Avionics, Fall Safety, Testing Services, Electro-Mechanical Components, Structural Maintenance, Aircraft Component Parts, Spare Parts...
West Paducah, KY, USA
Spare Parts, Component Sales, Aircraft Component Parts, Leasing, Line Maintenance, Avionics, Calibration & Weighing, Part Sales, Propeller MRO
North Canton, OH, USA
Composite Repair, Line Maintenance, Heavy Checks, Interiors, Painting, Windows, Calibration & Weighing, Avionics, Fall Safety, Part Sales, Airframe, Fabrication, Component Repair, Aircraft Component...
Essex, UK
Spare Parts, Interiors, Testing Services, Part Sales, Component Sales, Aircraft Component Parts, Calibration & Weighing, Seating, Coffee Makers
Upland, CA, USA
Airframe, Line Maintenance, Calibration & Weighing, Engine Overhaul, Propeller MRO, Leasing, Heavy Checks, Testing Services, Fans
Unna, Germany
Surface Treatments, Testing Services, Paints & Coatings
Unique Airmotive Services
FAA, EASALake Wylie, SC, USA
UAS maintains a pool of APUs & accessories for exchange to provide immediate delivery. Located just minutes from Charlotte’s International Airport, we service a global market daily. With a state of...
Melville, NY, USA
Part Sales, Avionics, Component Sales, Aircraft Component Parts, Component Repair, Spare Parts, Testing Services
Elk Grove Village, IL, USA
Magnetic Inspection Laboratory is a NADCAP, AS9100 and FAA certified special processor performing NDT, metal finishing, painting, coatings and welding services for the aerospace, power generation and...
Fort Collins, CO, USA
Heavy Checks, Component Repair, Structural Maintenance, Painting, Part Sales, Component Sales, Avionics, Spare Parts, Engine Overhaul, Engine Accessories, Testing Services
Chatsworth, CA, USA
Aircraft Component Parts, Component Repair, Calibration & Weighing, Spare Parts, Testing Services, Part Sales, Avionics, Component Sales
Ronkonkoma, NY, USA
Part Sales, Line Maintenance, Avionics, Component Sales, Aircraft Component Parts, Spare Parts, Testing Services
Wichita, KS, USA
Hydraulics, Part Sales, Component Repair, Spare Parts, Engine Accessories, Avionics, Electro-Mechanical Components, Component Sales, Pneumatic Components, Testing Services, Motion Controls
Marietta, GA, USA
Applied Technical Services (ATS) offers Metrology services including, but not limited to, Avionics Calibration, Mechanical and Electrical calibration, Materials testing, NDT services, Failure...
Ft Worth, TX, USA
Component Repair, Spare Parts, Engine Overhaul, Engine Accessories, Test Equipment, Testing Services, Propeller MRO
Los Angeles, CA, USA
Propeller MRO, Testing Services, Structural Maintenance, Spare Parts, Tools & Accessories, Engine Accessories, Part Sales, Fabrication, Component Sales
St. Louis, MO, USA
Paints & Coatings, Electro-Mechanical Components, Aircraft Component Parts, Spare Parts, Hydraulics, Pneumatic Components, Welding, Testing Services, Component Sales, Component Repair, Machining &...
Doral, FL, USA
Global Engine Maintenance (GEM) is an internationally recognized high-performance FAA and EASA Certified Repair Station for CFM56-7, CFM56-3 and JT8D Engines. We are dedicated to serving the...
Miramar, FL, USA
Component Repair, Structural Maintenance, Pneumatic Components, 3D Printing, Machining & Tooling, Wings, Control Panels, Landing Gear, Airframe, Part Sales, Wheel & Brake, Fabrication, Flight...